ProStar MPPT

Objects and Definitions

Data

This is the complete list of data objects that can be accessed using the Data dropdown on the dashboard

Object	Description	Type	Symbol
`n_sys_v`	Nominal Battery Voltage	volts	V
`vdd_actual`	3.3V Supply Voltage	volts	V
`adc_p12`	Gate Drive Voltage	volts	V
`adc_p5`	5V Supply Voltage	volts	V
`adc_fgdrive`	Gate Drive Voltage	volts	V
`adc_vmeter`	MeterBus Supply Voltage	volts	V
`adc_ic_f_shadow`	Charge Current	amps	A
`adc_ia_f_shadow`	Array Current	amps	A
`adc_vbterm`	Battery Terminal Voltage	volts	V
`adc_va_f_shadow`	Array Voltage	volts	V
`adc_vl`	Load Voltage	volts	V
`adc_ib_f_shadow`	Battery Current (net)	amps	A
`adc_il`	Load Current	amps	A
`adc_vbsense`	Battery Sense Voltage	volts	V
`adc_vb_f_1m`	Battery Voltage, slow filter (60s)	volts	V
`adc_ib_f_1m`	Battery Current (net), slow filter (60s)	amps	A
`T_hs`	Heatsink Temperature	celsius	°C
`T_batt`	Battery Temperature (Either Ambient or RTS if connected)	celsius	°C
`T_amb`	Ambient (local) Temperature	celsius	°C
`T_rts`	Remote Temperature Sensor Temp.	celsius	°C
`T_ind`[U]	Phase U inductor temperature	celsius	°C
`T_ind`[V]	Phase V inductor temperature	celsius	°C
`T_ind`[W]	Phase W inductor temperature	celsius	°C
`charge_state`	Charge State	string
`array_fault`	Array Fault Bitfield	array
`vb_f`	Battery Voltage, slow filter (25s)	volts	V
`vb_ref`	Battery Regulator Reference Voltage	volts	V
`vb_ref_charge_slave`	Battery Regulator Slave Voltage	volts	V
`Ahc_r`	Ah Charge Resettable	amp-hours	Ah
`Ahc_t`	Ah Charge Total	amp-hours	Ah
`kWhc_r`	kWh Charge Resettable	kilowatt-hours	kWh
`kWhc_t`	Kwh Charge Total	kilowatt-hours	kWh
`Tb_lo_limit_100`	Battery Temp Foldback 100% Output Limit	celsius	°C
`Tb_lo_limit_0`	Battery Temp Foldback 0% Output Limit	celsius	°C
`load_state`	Load State	string
`load_fault`	Load Fault Bitfield	array
`V_lvd`	Load Current Compensated LVD Voltage	volts	V
`V_lhvd`	Load HVD Voltage	volts	V
`Ahl_r`	Ah Load Resettable	amp-hours	Ah
`Ahl_t`	Ah Load Total	amp-hours	Ah
`hourmeter`	Hourmeter	hours
`alarm`	Current alarms	array
`dip_switch`	DIP Switch Settings at Power On (switch[1..8] in bits[0..7])	array
`led_state`	SOC LED State	string
`Power_out`	Charger Output Power	watts	W
`Sweep_Vmp`	Array Vmp (found during sweep)	volts	V
`Sweep_Pmax`	Array Max Output Power (found during sweep)	watts	W
`Sweep_Voc`	Array Voc (found during sweep)	volts	V
`va_ref`	Array Target Voltage	volts	V
`Vb_min_daily`	Minimum Battery Voltage (daily)	volts	V
`Vb_max_daily`	Maximum Battery Voltage (daily)	volts	V
`Ahc_daily`	Ah Charge (daily)	amp-hours	Ah
`Ahl_daily`	Ah Load (daily)	amp-hours	Ah
`array_fault_daily`	Array Fault Bitfield (daily)	array
`load_fault_daily`	Load Fault Bitfield (daily)	array
`alarm_daily`	Alarm Bitfield (daily)	array
`time_ab_daily`	Time in Absorption (daily)	seconds
`time_eq_daily`	Time in Equalization (daily)	seconds
`time_fl_daily`	Time in Float (daily)	seconds
`Va_max_daily`	Maximum Array Voltage (daily)	volts	V
`charge_led_state`	Charge Status LED State	string
`lighting_should_be_on`	lighting on or off	string
`va_ref_fixed`	Fixed Vmp if set	volts	V
`va_ref_fixed_pct`	Vmp = this fraction of Voc if set	percentage	%
`EV_reg`	Regulation Voltage @ 25ºC	volts	V
`EV_float`	Float Voltage @ 25ºC	volts	V
`Et_float`	Time Before Entering Float	seconds
`Et_floatlb`	Time Before Entering Float due to Low Battery	seconds
`EV_floatlb_trip`	Voltage Trigger for Low Battery Float Time	volts	V
`EV_float_cancel`	Voltage to cancel float	volts	V
`Et_float_exit_cum`	Exit Float Time	seconds
`EV_eq`	Equalize Voltage @ 25ºC	volts	V
`Et_eqcalendar`	Days Between EQ Cycles	days
`Et_eq_above`	Equalize Time Limit above EV_reg	seconds
`Et_eq_reg`	Equalize Time Limit at EV_eq	seconds
`Evb_ref_charge_lim`	Reference Charge Voltage Limit	volts	V
`Eib_lim`	Battery Charge Current Limit	amps	A
`EV_tempcomp`	Temperature Compensation Coefficient	volts	A
`EV_hvd`	High Voltage Disconnect @ 25ºC	volts	A
`EV_hvr`	High Voltage Reconnect	volts	A
`Evb_ref_lim`	Maximum Charge Voltage Reference	volts	A
`ETb_max`	Max Battery Temp Compensation Limit	celsius	°C
`ETb_min`	Min Battery Temp Compensation Limit	celsius	°C
`EV_lvd`	Low Voltage Disconnect	volts	V
`EV_lvr`	Low Voltage Reconnect	volts	V
`EV_lhvd`	Load High Voltage Disconnect	volts	V
`EV_lhvr`	Load High Voltage Reconnect	volts	V
`ER_icomp`	LVD Load Current Compensation	ohms	Ω
`Et_lvd_warn`	LVD Warning Timeout	seconds
`EV_soc_g_gy`	LED Green to Green&Yellow Limit	volts	V
`EV_soc_gy_y`	LED Green&Yellow to Yellow Limit	volts	V
`EV_soc_y_yr`	LED Yellow to Yellow&Red Limit	volts	V
`EV_soc_yr_r`	LED Yellow&Red to Red Flashing Limit	volts	V
`Emodbus_id`	Modbus ID
`Emeter_id`	Meterbus ID
`EVa_ref_fixed`	Fixed Vmp if set (overrides EVa_ref_fixed_pct below if both set)	volts	V
`EVa_ref_fixed_pct`	Vmp = this fraction of Voc if set (0.0 to 0.99; 0.0 disables)	percentage	%
`Eic_lim`	Charge Current Limit	amps	A
`Ehourmeter`	Hourmeter	hours
`EAhl_r`	Ah Load Resettable	amp-hours	Ah
`EAhl_t`	Ah Load Total	amp-hours	Ah
`EAhc_r`	Ah Charge Resettable	amp-hours	Ah
`EAhc_t`	Ah Charge Total	amp-hours	Ah
`EkWhc_r`	kWhc Resettable	kilowatt-hours	kWh
`EkWhc_t`	kWhc Total	kilowatt-hours	kWh
`EVb_min`	Battery Voltage Minimum	volts	V
`EVb_max`	Battery Voltage Maximum	volts	V
`EVa_max`	Array Voltage Maximum	volts	V
`Etmr_eqcalander`	Time Since Last Equalize	days

Action

Object	Description
`eq`	Trigger equalize charge
`load_on`	Turn load on
`load_off`	Turn load off
`charge_on`	Turn charge on
`charge_off`	Turn charge off
`Ah_r`	Reset Ah resettable
`Ah_t`	Reset Ah total
`kWh_r`	Reset kWh resettable
`faults`	Reset faults
`alarms`	Reset Alarms
`EEPROM`	Reset EEPROM
`kWh_t`	Reset kWh total
`Vb`	Reset battery min and max
`light_test`	Lighting Mode Test - when lighting mode is enabled turns on load output for 10 minutes
`factory_reset`	Factory reset all values
`reset`	Reset controller

2 Hour Logs

These objects are logged every 2 hours.

Objects:

adc_ic_f_shadow
adc_ia_f_shadow
adc_vbterm
adc_va_f_shadow
adc_vl
adc_ib_f_shadow
adc_il
T_hs
T_amb
Power_out
Sweep_Vmp
va_ref

Daily Logs

These objects are logged once every day.

Objects:

kWhc_t
Vb_min_daily
Vb_max_daily
Ahc_daily
Ahl_daily
Va_max_daily

Alerts

These objects are scanned every few seconds and alerts will be sent as soon as any critical issues are detected.

Objects:

load_state
charge_state
array_fault
load_fault
alarm